Exposure 3510 Integrated Amplifier (NEW MODEL)

Key Features

• 110W RMS per channel into 8 Ohms
• Six line inputs
• Option to fit a MC or MM phono module or plug in DAC option
• Bi-wiring compatible
• Separate Pre Amp output
• High quality capacitors used in the signal path
• Uniquely tuned short signal and Power Supply path PCB
• Cascode circuitry utilised for improved power supply immunity
• Fast bipolar transistor output stage for dynamic and vivid performance
• All aluminium casework and extruded front panel to control resonance and stray electromagnetic fields
• Remote control

Key Specification

Outputs:

• Power Output (Stereo): 110W per channel at 1kHz into 8 Ohms

Pre Amplifier

• Pre Amplifier Output: 1.9V for rated input (gain *18dB full volume)
• Maximum Output: 77V RMS @ 1kHz
• Frequency Response: 20Hz – 20kHz + 0.5dB
• Total Harmonic Distortion: <0.03% at rated output, ref. 1kHz
• Signal to Noise Ratio: >100dB, ref. rated output
• Channel Separation: >60dB 20Hz – 20kHz

Headphone

• Output Impedance: <12 Ohms at 1kHz
• Maximum Level into 33 Ohms at 1kHz & 0.05% THD: 4.8V RMS, (700mW)
• Total Harmonic Distortion at 2V Output 1kHz: <0.02%, (120mW)
• Maximum Level into 330 Ohms at 1kHz & 0.02% THD: 7V RMS (150mW)

Inputs (Line)

• Input Impedance: 76 Ohms minimum (Line Input)
• Input Sensitivity: 250mV

General

• Mains Supply: 110/120V or 220/240V, 50/60 Hz (factory set)
• Fuse: TSAL for 110/120V units, T4AL for 220/240V units
• Power Consumption: <400W, 8 Ohms load, both channels driven
• Dimensions (HxWxD): 115 x 440 x 300 mm
• Net Weight: 12 kg
• Gross Weight: 14 kg